Effects of SO2 and H2O on low-temperature NO conversion over F-V2O5-WO3/TiO2 catalysts

F-V_2 O_5-WO3/Ti02 catalysts were prepared by the impregnation method.As the content of F ions increased from 0.00 to 0.35 wt.%,the NO conversion of F-V_2 O_5-WO_3/TiO_2 catalysts initially increased and then decreased.The 0.2 F-V_2 O_5-WO_3/TiO_2 catalyst(0.2 wt.% F ion)exhibited the best denitration(De-NOx) performance,with more than 95% NO conversion in the temperature range 160-360℃,and 99.0% N2 selectivity between 110 and 280℃.The addition of an appropriate amount of F ions eroded the surface morphology of the catalyst and reduced its grain size,thus enhancing the NO conversion at low temperature as well as the sulfur and water resistance of the V_2 O_5-WO3/Ti02 catalyst.After selective catalytic reduction(SCR) reaction in a gas flow containing SO_2 and H_2 O,the number of NH3 adsorption sites,active component content,specific surface area and pore volume decreased to different degrees.Ammonium sulfate species deposited on the catalyst surface,which blocked part of the active sites and reduced the NO conversion performance of the catalyst.On-line thermal regeneration could not completely recover the catalyst activity,although it prolonged the cumulative life of the catalyst.In addition,a mechanism for the effects of S02 and H_2 O on catalyst NO conversion was proposed.     

Density functional theory (DFT) studies of vanadium-titanium based selective catalytic reduction (SCR) catalysts

Based on density functional theory (DFT) and basic structure models, the chemical reactions on the surface of vanadium-titanium based selective catalytic reduction (SCR) denitrification catalysts were summarized. Reasonable structural models (non-periodic and periodic structural models) are the basis of density functional calculations. A periodic structure model was more appropriate to represent the catalyst surface, and its theoretical calculation results were more comparable with the experimental results than a non-periodic model. It is generally believed that the SCR mechanism where NH₃ and NO react to produce N₂ and H₂O follows an Eley-Rideal type mechanism. NH₂NO was found to be an important intermediate in the SCR reaction, with multiple production routes. Simultaneously, the effects of H₂O, SO₂ and metal on SCR catalysts were also summarized.     

Chemical characteristics of road dust PM2.5 fraction in oasis cities at the margin of Tarim Basin

In order to understand the compositions characteristics of particulate matter with aerodynamic diameter less than 2.5 μm (PM_2.5) fraction in road dust (RD_2.5) of oasis cities on the edge of Tarim Basin, 30 road dust (RD) samples were collected in Kashi, Cele, and Yutian in the spring, 2018, and RD_2.5 was collected using the resuspension approach. Eight water-soluble ions, 39 trace elements and 8 fractions of carbon-containing species in PM_2.5 were analyzed. Ca²⁺ and Ca were the most abundant ions and elements in RD_2.5 (7.1% and 9.5%). Cl^- in RD_2.5 was affected not only by attributed to saline-alkali soils in oasis cities of the Tarim Basin and dust from Taklimakan Desert but also by human activities. Moreover, the organic carbon/elemental carbon (OC/EC) ratio indicated that carbon components in RD_2.5 in Cele town mainly come from fossil fuel combustion, while those in Yutian and Kashi mainly come from biomass combustion. It is noteworthy that high Ca in RD_2.5 was seriously affected by anthropogenic emissions, and high Na and K contents in RD_2.5 could be derived from soil and desert dust. It was estimated that Cd, Tl, Sn and Cr were emitted from anthropogenic emissions using the enrichment factor. The coefficients of divergence (COD) result indicated that the influence of local emission on road dust emission is greater than that of long-distance transmission. This study is the first time to comprehensively analyze the chemical characteristics of road dust in oasis cities, and the results provides the sources of road dust at the margin of Tarim Basin.     

2019年10~12月京津冀及周边“2+26”城市重污染减排效果评估

为评估京津冀及周边区域重污染过程期间应急减排措施的效果,基于情景模拟的方法,采用NAQPMS模式和多种观测资料,分析了2019年10~12月期间京津冀及周边区域环境空气质量、重污染过程和气象条件概况,评估了模式24、72和144 h的PM_2.5预报效果,并对应急减排措施的效果和不确定性进行了讨论.结果表明,2019年10~12月京津冀及周边"2+26"城市PM_2.5平均浓度64 μg ·m^-3,同比降低了10 μg ·m^-3;区域性重污染过程4次,受影响城市重污染过程期间PM_2.5平均浓度156 μg ·m^-3."2+26"城市PM_2.5气象条件评估指数（EMI）变化值范围为-15.6%~16.8%,EMI显示北京、天津和石家庄等12个城市气象条件与同期相比变差,变差程度范围为3.2%~16.8%.减排情景模拟分析显示应急减排措施有效减少了区域性重污染过程的发生,污染物峰值浓度降幅明显,未出现区域性严重污染过程.典型重污染期间,北京、石家庄、保定和唐山等城市PM_2.5日均浓度削减2%~9%.区域应急减排措施促使"2+26"城市PM_2.5季度均值分别降低1~3 μg ·m^-3左右,区域性减排效果明显.     

德州市夏季臭氧敏感性特征及减排方案

近年来德州市臭氧污染频发,2018年夏季（6~8月）,德州市发生了严重臭氧污染事件,臭氧日最大8 h浓度值超标天数达60 d,超标率65%,3个月平均值为176 μg ·m^-3,最高达262 μg ·m^-3.本研究利用WRF-CAMx耦合的HDDM模块,分析期间德州臭氧敏感性特征及减排方案.结果表明,在空间上,德州市中心城区为VOCs控制区,而郊区为NO_x与VOCs协同控制区.在时间上,VOCs敏感值每日为正值,但dO₃_V₅₀在6月（城区18.7 μg ·m^-3,郊区19.7 μg ·m^-3）和8月（城区15.3 μg ·m^-3,郊区16.4 μg ·m^-3）高于7月（城区13.0 μg ·m^-3,郊区11.8 μg ·m^-3）,NO_x敏感值城区呈正负交错,郊区大部分为正值,并与VOCs敏感值接近.对于城区减排方案应考虑以仅VOCs削减为优先,而郊区由于NO_x和VOCs对臭氧减排效果相当,建议以NO_x：VOCs=1：1为优.     

CeO2形貌结构对催化湿式空气氧化苯酚性能的影响

采用水热法、沉淀法和溶胶凝胶法制备了3种不同形貌的CeO₂催化材料,并将其用于湿式空气氧化苯酚水溶液过程中,探讨了CeO₂形貌结构对催化湿式氧化苯酚水溶液性能的影响.采用扫描电子显微镜（SEM）、透射电子显微镜（TEM）、X射线衍射（XRD）、程序升温还原（TPR）等手段对CeO₂催化材料进行了表征.结果表明,水热法制备的CeO₂催化材料表现出较好催化性能,主要原因是水热法合成的CeO₂呈现交错的纳米棒状结构,主要暴露（220）晶面,且沿着（220）晶向生长.在反应温度为200℃、空气压力为2MPa、苯酚初始浓度500mg/L的条件下,最终（240min）COD的去除率为95.5%.     

C OD在线分析仪比对中应注意的问题

分析了COD在线分析仪和实验室比对结果人为差异的原因是样品不均匀,在线分析仪取样装置滤过,取样层面和采样方式以及沉淀消除的方法不同造成的.提出应在相同的地点、层面和同一容器取样,用相同沉淀消除方法去除样品中氯离子干扰,保证两方法比对中使用水样的一致均匀,使测试结果正确可信.     

CODMn重新稀释取样体积的推定

对原CODMn法测地表水二次取样体积进行了推导，建立了实际适用取样体积公式，具有一定的适用性。     

Flue gas treatability studies: a tool for techno-economic control of industrial air pollution

Air pollution problems in developing countries have gained larger fraction in the last decade especially due to non functioning and non implementation of effective air pollutioncontrol devices in industries. In industrial wastewater management, adequate treatability studies are conducted to arrive at a techno-economic treatment option. However no suchstudies were done for reducing air pollution or emission fromindustries until now in India. Little information was availableabout such studies in other countries. This article provides information about a novel technique known asflue gas treatability studies and to undertake such studies, a pilot scale system is installed in Air Pollution Control Divisionof M/s National Environmental Engineering research Institute, NEERI, Nagpur-20, India. This study is a tool for techno-economicselection of air pollution control systems specially for small/medium scale industrial emissions.     

大辽河水系主要污染物特征分析

对大辽河流域主要污染物CODMn(或CODCr)和氨氮多年时空变化特征进行分析,认为二者浓度在空间上都有从上游到下游显著升高的趋势,年内变化呈现明显的点源特征。